Component Function Check
- CHECK FUNCTION 1
- Disconnect anti theft horn relay.
- Perform "ANTI-THEFT HORN " in "ACTIVE TEST" mode of "THEFT ALM" of "BCM" using CONSULT.
- Check the horn operation.
Test item Description ANTI-THEFT HORN ON ANTI-THEFT HORN Sounds (for 0.5 sec) Is the operation normal?
YES: GO TO 2.
NO: Go to "DIAGNOSIS PROCEDURE ".
- CHECK FUNCTION 2
- Reconnect anti-theft horn relay.
- Disconnect horn relay.
- Perform "ANTI-THEFT HORN " in "ACTIVE TEST" mode of "THEFT ALM" of "BCM" using CONSULT.
- Check the horn operation.
Test item Description ANTI-THEFT HORN ON Anti-theft horn Sounds (for 0.5 sec) Is the operation normal?
YES: Inspection End.
NO: Go to "DIAGNOSIS PROCEDURE ".