Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
| Component | Signal description | ||
|---|---|---|---|
| ADAS control unit | Mainly transmits the following signal to ABS actuator and electric unit (control unit) via CAN communication:
|
||
| ECM | Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication:
|
||
| ABS actuator and electric unit (control unit) | Mainly transmits the following signals to ADAS control unit via CAN communication:
|
||
| Yaw rate/side/decel G sensor | Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line (1):
|
||
| Drive mode select switch | Outputs ON/OFF status of STANDARD, SPORT, ECO, SNOW mode to A/C auto AMP. | ||
| A/C auto AMP | Mainly transmits the following signal to ADAS control unit via CAN communication:
|
||
| Steering angle sensor | Mainly transmits the following signal to ADAS control unit via CAN communication:
|
||
| Combination meter | Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:
Mainly receives the following signal from ADAS control unit via CAN communication:
|
||
|
|||