DTC Confirmation Procedure
WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Press push-button ignition switch under the following conditions, and wait 2 seconds or more.
- Selector lever: In the P position
- Brake pedal: Not depressed
- Turn ignition switch OFF.
- Press driver side door switch and wait 2 seconds or more.
- Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.
Is DTC detected?
YES: Go to "Diagnosis Procedure ".
NO: INSPECTION END
- Press push-button ignition switch under the following conditions, and wait 2 seconds or more.