LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> M35h >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes & Symptom Tests) >> DTC/Circuit Diagnosis >> Manifold Absolute Pressure Sensor >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR FUNCTION 
    1. Perform "INSPECTION MODE 5". Refer to "WORK PROCEDURE (INSPECTION MODE 5) ".
    2. Start engine and warm it up to the normal operating temperature.
    3. Check the voltage between ECM harness connector terminals as per the following.
    ECM Voltage (V)
    Connector + -
    Terminal Terminal
    M107 38 36 1.0 - 4.0

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Go to "DIAGNOSIS PROCEDURE "

scientia non olet · About LEMON Manuals