Work Procedure

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before using inspection mode 1 when the Li-ion battery level is low, in order to engage clutch 1 and charge the battery from the engine, use CONSULT "EV/HEV" "DATA MONITOR" mode and check that the "HV BATTERY LEVEL" reading is 50% or more, or else use the "Li-ion battery state of charge" in the information display on the combination meter and check that the battery level is 50% or more.
Check that the engine coolant temperature is 70 °C (158 °F) or more before using inspection mode 1.

PERFORM CLUTCH 1 POSITION LEARNING
1. Set the vehicle to READY.
2. Shift the selector lever position N and check that an engine stops.
3. Fully depress accelerator pedal and start an engine.
4. Fully release accelerator pedal and stop an engine.
5. Repeat step 3 and 4 for 50 times.
  : END