Inspection Mode 5

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.

CHANGING TO INSPECTION MODE
◦ With CONSULT
1. Turn ignition switch OFF.
2. Select "INSPECTION MODE 5" in "ACTIVE TEST" mode of "EV/HEV".
3. Touch "ON".
4. Change to inspection mode 5.
5. Set the vehicle to READY.
ⓧ Without CONSULT
1. Perform the following steps within 60 seconds.
  - Turn ignition switch ON with the selector lever at the P position.
  - Fully depress the accelerator pedal, then fully release it 6 times.
  - While depressing the brake pedal, shift the select lever to the N position.
  - Fully depress the accelerator pedal, then fully release it 6 times.
  - While depressing the brake pedal, shift the select lever to the P position.
  - Fully depress the accelerator pedal, then fully release it 6 times.
2. Change to inspection mode 5.
3. Set the vehicle to READY.
  : END