Component Function Check
WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM COMPONENT FUNCTION CHECK
◦ With CONSULT
- Turn ignition switch ON.
- Select "ASCD BRAKE SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
- Check that monitor indication as per the following condition.
Monitor item Condition Indication ASCD BRAKE SW Brake pedal Slightly depressed OFF Fully released ON
ⓧ Without CONSULT
- Turn ignition switch ON.
- Check the voltage HPCM harness connector terminals as per the following condition.
+ - Condition Voltage (Approx.) HPCM Connector Terminal B159 59 Ground Brake pedal Slightly depressed 0 V Fully released Battery voltage Is the inspection result normal?
YES: INSPECTION END
NO: Proceed to "DIAGNOSIS PROCEDURE ".