Component Function Check
WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM COMPONENT FUNCTION CHECK
◦ With CONSULT
- Select "STOP LAMP SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
- Check that monitor indication as per the following condition.
Monitor item Condition Indication STOP LAMP SW Brake pedal Slightly depressed ON Fully released OFF
ⓧ Without CONSULT
- Turn ignition switch OFF.
- Check for stop lamp illumination as per the following condition.
Brake pedal Stop lamp Fully released Not illuminated Slightly depressed Illuminated Is the inspection result normal?
YES: INSPECTION END
NO: Proceed to "DIAGNOSIS PROCEDURE ".