Inspection Mode 5

CHANGING TO INSPECTION MODE
With CONSULT
1. Turn ignition switch OFF.
2. Select "INSPECTION MODE 5" in "ACTIVE TEST" mode of "EV/HEV".
3. Touch "ON".
4. The system changes to inspection mode 5, and the hybrid system warning lamp on the combination meter blinks.
5. Set the vehicle to READY.
Without CONSULT
1. Perform the following steps within 60 seconds.
  - Turn ignition switch ON with the selector lever at the P position.
  - Fully depress the accelerator pedal, then fully release it 6 times.
  - While depressing the brake pedal, shift the select lever to the N position.
  - Fully depress the accelerator pedal, then fully release it 6 times.
  - While depressing the brake pedal, shift the select lever to the P position.
  - Fully depress the accelerator pedal, then fully release it 6 times.
2. The system changes to inspection mode 5, and the hybrid system warning lamp on the combination meter blinks.
3. Set the vehicle to READY.
  END