LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> M35h >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt Control System >> System Description >> System >> Fail Safe (Passenger Side)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail Safe (Passenger Side)

When a system malfunction is detected, deactivates a part of the system or all functions depending on the malfunctioning part.

When the malfunction condition recovers to the normal condition, the system returns to the normal operation.

Display contents of CONSULT Fail-safe
B2452: SEAT BLT MTR AS CIRC Fully deactivates the whole operation.
B2455: CONTROL UNIT DR Stops the operation in the conditions as per the following.(1)
  • During emergency brake operation
  • When ABS continuously operates
  • When lateral slippage during cornering occurs
  • When Intelligent brake assistance operates
  • When steering wheel is rotated for emergency
  • A part or the whole comfort function
B2456: SEAT BLT PWR AS Fully deactivates the whole operation.
B2457: CONTROL UNIT AS Fully deactivates the whole operation.(1)
B2458: LOCAL COMM Fully deactivates the whole operation.(1)
B2461: VHCL SPEED SIGNAL Stops the operation in the conditions as per the following.
  • During emergency brake operation
  • When ABS continuously operates
  • When lateral slippage during cornering occurs
  • When steering wheel is rotated for emergency
  • A part or the whole comfort function
B2466: DR/AS CONTROL UNIT Stops the operation in the conditions as per the following.(1)
  • During emergency brake operation
  • When ABS continuously operates
  • When lateral slippage during cornering occurs
  • When Intelligent brake assistance operates
  • When steering wheel is rotated for emergency
  • A part or the whole comfort function
B2471: SYS HEAT PROTC AS
  • Fully deactivates the whole operation.
  • Operation return

  • 1 time operation becomes possible after approximately 30 seconds
  • Returns to the initial condition after approximately 8 minutes
B2472: BRAKE STROKE SENSOR Stops the operation in the conditions as per the following.
  • During emergency brake operation
  • When ABS continuously operates
U0126: STRG ANG SEN SIG Stops the operation in the conditions as per the following.
  • When lateral slippage during cornering occurs
  • When steering wheel is rotated for emergency
U0428: STRG ANGL CAL Stops the operation in the conditions as per the following.
  • When lateral slippage during cornering occurs
  • When steering wheel is rotated for emergency
U1000: CAN communication circuit Stops the operation in the conditions as per the following.(1)
  • During emergency brake operation
  • When ABS continuously operates
  • When lateral slippage during cornering occurs
  • When Intelligent brake assistance operates
  • When steering wheel is rotated for emergency
  • A part or the whole comfort function
(1) The deactivation mode differs depending on the internal malfunctioning condition of control unit
scientia non olet · About LEMON Manuals