| 1 |
Door switch (Driver side) |
- |
Driver seat control unit receives door switch signal (driver side/open) from BCM via CAN communication. |
| 2 |
- |
Motors (Sliding, tilt) |
Driver seat control unit operates the seat sliding motor, which recognizes that the driver side door is opened with ignition switch OFF. Driver seat control unit then requests the operations of tilt motor to auto drive positioner control unit via UART communication. The automatic drive positioner control unit operates each motor for a constant amount. |
| 3 |
Sensor (Sliding, tilt) |
- |
Each sensor monitors the operating positions of seat and steering, and then stops the operation of each motor when steering reaches to the tilt top position and seat reaches to the rearmost position. |