LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> M37 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> DTC/Circuit Diagnosis >> Encoder >> Rear RH >> REAR RH: Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

REAR RH: Diagnosis Procedure

  1. CHECK ENCODER SIGNAL 
    1. Turn ignition switch ON.
    2. Check signal between rear power window switch RH harness connector and ground with oscilloscope.
      (+) (-) Signal (Reference value)
      Rear power window switch RH
      Connector Terminal
      D74 12 Ground Refer to following signal
      15
      Fig 1: Rear Power Window Main Switch (RH) Encoder Signal 1 And 2 Signal Waveform
      G06934392Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: GO TO 2.

  2. CHECK ENCODER SIGNAL CIRCUIT 
    1. Turn ignition switch OFF.
    2. Disconnect rear power window switch RH connector and rear power window motor RH connector.
    3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
      Rear power window switch RH Rear power window motor RH Continuity
      Connector Terminal Connector Terminal
      D74 12 D72 5 Existed
      15 6
    4. Check continuity rear power window switch RH harness connector and ground.
      Rear power window switch RH Ground Continuity
      Connector Terminal
      D74 12 Not existed
      15

      Is the inspection result normal? 

      YES: GO TO 3.

      NO: Repair or replace harness.

  3. CHECK ENCODER POWER SUPPLY CIRCUIT 1 
    1. Connect rear power window switch RH connector.
    2. Turn ignition switch ON.
    3. Check voltage between rear power window motor RH harness connector and ground.
      (+) (-) Voltage (V) (Approx.)
      Rear power window motor RH
      Connector Terminal
      D72 2 Ground 12

      Is the inspection result normal? 

      YES: GO TO 4.

      NO: GO TO  5.

  4. CHECK GROUND CIRCUIT 1 
    1. Turn ignition switch OFF.
    2. Check continuity between rear power window motor RH harness connector and ground.
      Rear power window motor RH Ground Continuity
      Connector Terminal
      D72 4 Existed

      Is the inspection result normal? 

      YES: Replace rear power window motor RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: GO TO  6.

  5. CHECK ENCODER POWER SUPPLY CIRCUIT 2 
    1. Turn ignition switch OFF.
    2. Disconnect rear power window switch RH connector.
    3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
      Rear power window switch RH Rear power window motor RH Continuity
      Connector Terminal Connector Terminal
      D74 4 D72 2 Existed
    4. Check continuity between rear power window switch RH harness connector and ground.
      Rear power window switch RH Ground Continuity
      Connector Terminal
      D74 4 Not existed

      Is the inspection result normal? 

      YES: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

  6. CHECK GROUND CIRCUIT 2 
    1. Disconnect rear power window switch RH harness connector.
    2. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.
      Rear power window switch RH Rear power window motor RH Continuity
      Connector Terminal Connector Terminal
      D74 3 D72 4 Existed
    3. Check continuity between rear power window switch RH harness connector and ground.
      Rear power window switch RH Ground Continuity
      Connector Terminal
      D74 3 Not existed

      Is the inspection result normal? 

      YES: Replace rear power window switch RH. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.

scientia non olet · About LEMON Manuals