Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

When replacing the BCM, it must be configured. Refer to "CONFIGURATION: WORK PROCEDURE ".
When replacing the BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to "CONFIGURATION: WORK PROCEDURE ".
When replacing the BCM, perform ID registration procedure of low tire pressure warning system. Refer to "ID REGISTRATION PROCEDURE ".
When replacing the BCM, register the remote keyless entry system keyfob ID codes. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: WORK PROCEDURE ".