Component Inspection
WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUEL INJECTOR
- Turn ignition switch OFF.
- Disconnect fuel injector harness connector.
- Check the resistance between fuel injector terminals as per the following.
+ - Condition Resistance Injector Terminal 1 2 Temperature 10 - 60°C (50 - 140°F) 1.44 - 1.73 Ω Is the inspection result normal?
YES: INSPECTION END
NO: Replace malfunctioning fuel injector. Refer to "EXPLODED VIEW ".