Special Repair Requirement

1. Park the vehicle on a flat road.
2. Adjust pressure in all tires to the specified value. Refer to "TIRE AIR PRESSURE ".

   GO TO 2.

With CONSULT 

1. Turn ignition switch ON.
   CAUTION: Never start the engine.
2. Select "G SENSOR CALIBRATION" in "Work Support" in "TRANSMISSION".
3. Touch "START".
   CAUTION: Never give any motion to the vehicle during the calibration.

Is "completed" displayed? 

YES: GO TO 3.

NO: Perform the calibration again.

With CONSULT 

1. Turn ignition switch OFF and wait 10 seconds or more.
2. Turn ignition switch ON.
3. Select "Self Diagnostic Results" in "ABS".

Is "C1145" or "C1146" detected? 

YES: Refer to "DTC INDEX ".

NO: Calibration end.