LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> M37 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Engine Control System (Introduction)) >> System Description >> System >> Air Conditioning Cut Control >> AIR CONDITIONING CUT CONTROL: System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor
Camshaft position sensor		 Engine speed(1) Air conditioner cut control IPDM E/R
↓
A/C relay
↓
Compressor
Engine coolant temperature sensor Engine coolant temperature
Accelerator pedal position sensor Accelerator pedal position
Battery Battery voltage(1)
Refrigerant pressure sensor Refrigerant pressure
Power steering pressure sensor Power steering operation
A/C auto amp. A/C ON signal(2)
A/C evaporator temperature(2)
Target A/C evaporator temperature(2)
Blower ON signal
Combination meter Vehicle speed(2)
(1) The ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to ECM via the CAN communication line.
scientia non olet · About LEMON Manuals