Component Inspection [ABS Actuator and Electric Unit (Control Unit)]

CHECK ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

Turn the ignition switch OFF.
Remove ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".

Check the resistance between ABS actuator and electric unit (control unit) connector terminals.

ABS actuator and electric unit (control unit)	Resistance (Approx.)
Terminal	Resistance (Approx.)
16 - 6	120 Ω

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ABS actuator and electric unit (control unit). Refer to "REMOVAL AND INSTALLATION ".