| Brake pedal slightly vibrates and operation sound (motor sound and sound from suspension) occurs when FDC function, TCS function, ABS function, EBD function, hill start assist function, Rise-up & Build-up function, Brake force distribution function or Active trace control function operates. |
This is not a malfunction, because it is caused by FDC function, TCS function, ABS function, EBD function, hill start assist function, Rise-up & Build-up function, Brake force distribution function and Active trace control function that are normally operated. |
| Brake stopping distance may become longer than models without ABS function depending on the road conditions, when ABS function is operated on slippery road like rough road, gravel road or snowy road. |
| Brake pedal vibrates and operation sound occurs during sudden acceleration and cornering, when FDC function, TCS function, Rise-up & Build-up function, Brake force distribution function or Active trace control function is operated. |
| Brake pedal vibrates and motor sound from the engine room occurs, when the engine starts or the vehicle starts just after starting the engine. |
This is not a malfunction, because it is caused by operation check of ABS actuator and electric unit (control unit). |
| Acceleration may be felt insufficient depending on the road conditions. |
This is not a malfunction, because it is caused by TCS function that puts the highest priority to obtain the optimum traction (stability). |
| TCS function may operate momentarily, while driving on a road where friction coefficient varies, or when downshifting, or fully depressing accelerator pedal. |
| ABS warning lamp and FDC warning lamp may turn ON, when the vehicle is on a rotating turntable or is given a strong shaking or large vibrations on a ship while the engine is running. |
In this case, restart the engine on a normal road. If the normal condition is restored, there is no malfunction. In that case, erase "ABS" self-diagnosis result memory with CONSULT. |
| FDC warning lamp may turn ON and FDC function, TCS function, Rise-up & Build-up function, Brake force distribution function and Active trace control function may not normally operate, when driving on a special road the is extremely slanted (bank in a circuit course). |
| A malfunction in yaw rate/side/decel G sensor system may be detected when the vehicle sharply turns during a spin turn, acceleration turn or drift driving while FDC function, TCS function, Rise-up & Build-up function, Brake force distribution function and Active trace control function are OFF (FDC OFF switch is pressed and FDC OFF indicator lamp is in ON status). |
| The vehicle speed does not increase, when the accelerator pedal is depressed while the vehicle is on a 2-wheel chassis dynamometer for speedometer check. |
This is normal. (When checking the vehicle on a chassis dynamometer, operate FDC OFF switch so that TCS function is OFF.) |