When a DTC is not stored in ECM
The erasing method depends on a permanent DTC stored in ECM. Refer to the following table.
NOTE:
If the applicable permanent DTC includes multiple groups, perform the procedure of Group B first. If the permanent DTC is not erased, perform the procedure of Group A.
| x: Applicable -: Not applicable | ||||||
|---|---|---|---|---|---|---|
| Group(1) | Perform "DTC CONFIRMATION PROCEDURE" for applicable DTCs. | Driving pattern | Reference | |||
| B | D | |||||
| A | x | - | - | "WORK PROCEDURE (GROUP A) " | ||
| B | - | x | x | "WORK PROCEDURE (GROUP B) " | ||
|
||||||