Component Inspection (Intake Air Temperature Sensor)
- CHECK INTAKE AIR TEMPERATURE SENSOR
- Turn ignition switch OFF.
- Disconnect mass air flow sensor (bank 1) harness connector.
- Check resistance between mass air flow sensor (bank 1) terminals as per the following.
Terminals Condition Resistance (kΩ) 1 and 2 Temperature [°C (°F)] 25 (77) 1.94 - 2.06 Is the inspection result normal?
YES: INSPECTION END
NO: Replace mass air flow sensor (bank 1) (with intake air temperature sensor). Refer to "EXPLODED VIEW ".