Inspection and Judgment: Inspection
- Inspect the amount of engine oil. Replenish the engine oil if necessary.
- Drive for about 10 minutes to warm up the vehicle so that the A/T fluid temperature is 50 to 80°C (122 to 176°F). Inspect the amount of ATF. Replenish if necessary.
- Securely engage the parking brake so that the tires do not turn.
- Start the engine, apply foot brake, and place selector lever in "D" position.
- Gradually press down the accelerator pedal while holding down the foot brake.
- Quickly read off the stall speed, and quickly release the accelerator pedal.CAUTION: Never hold down the accelerator pedal for more than 5 seconds during this test.
Stall speed: Refer to " STALL SPEED ".
- Shift the selector lever to "N" position.
- Cool down the ATF.CAUTION: Run the engine at idle for at least 1 minute.
- Repeat steps 5 through 8 with selector lever in "R" position.