Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

All Items

Displays the status of the following vehicle signals inputted into TCU.
For each signal, the actual signal can be compared with the condition recognized on the system.

Display item	Display	Condition	Note
ECHO CANCEL	type1	-	This item is displayed, but cannot be monitored.
	type2
	type3
	type4
NOISE CANCEL	type1	-	This item is displayed, but cannot be monitored.
	type2
	type3
	type4
TCU STANDBY TIME	14DAYS	Set at 14 days (default)	Set value for continued operation time to control battery consumption
	2DAYS	Set at 2 days
	30DAYS	Set at 30 days
	NON	No setting
NAD OUTPUT STATUS	On	When TCU activation is ON	NAD: Abbreviation of Network Access Device. ON/OFF setting of radio wave
NAD OUTPUT STATUS	Off	When TCU activation is OFF
ACN COMM SEQUENCE LOG	-	-	-
SOS COMM SEQUENCE LOG	-	-	-

SELECTION FROM MENU

Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.

Item to be selected	Description
ECHO CANCEL	"The same as when ALL SIGNALS" is selected
NOISE CANCEL
TCU STANDBY TIME
NAD OUTPUT STATUS
ACN COMM SEQUENCE LOG
SOS COMM SEQUENCE LOG

Work Support

Performs TCU activation setting and center connection setting.

Item name	DESCRIPTION
SAVE VIN DATA	The VIN data saved in TCU is stored in CONSULT.
CHANGE TCU ACTIVATE SETTING	TCU ON/OFF setting is available.
CENTER CONNECTION SETTING	Connection of the Infiniti Connection™ Data Center can be set.
WRITE VIN DATA	Write VIN data stored by "SAVE VIN DATA" in work support mode to TCU.
WRITE VIN DATA (MANUAL)	Write VIN data in TCU.