LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (With VDC) >> System Description >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> CONSULT Function >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
x: Applicable
Item (Unit) Monitor item selection Note
INPUT SIGNALS MAIN ITEMS
FR LH SENSOR
[km/h (MPH)]
x x Wheel speed calculated by front LH wheel sensor is displayed.
FR RH SENSOR
[km/h (MPH)]
x x Wheel speed calculated by front RH wheel sensor is displayed.
RR LH SENSOR
[km/h (MPH)]
x x Wheel speed calculated by rear LH wheel sensor is displayed.
RR RH SENSOR
[km/h (MPH)]
x x Wheel speed calculated by rear RH wheel sensor is displayed.
DECEL G-SEN
(G)
x x Decel G detected by decel G sensor is displayed.
FR RH IN SOL
(On/Off)
  x Operation status of front RH wheel ABS IN valve is displayed.
FR RH OUT SOL
(On/Off)
  x Operation status of front RH wheel ABS OUT valve is displayed.
FR LH IN SOL
(On/Off)
  x Operation status of front LH wheel ABS IN valve is displayed.
FR LH OUT SOL
(On/Off)
  x Operation status of front LH wheel ABS OUT valve is displayed.
RR RH IN SOL
(On/Off)
  x Operation status of rear RH wheel ABS IN valve is displayed
RR RH OUT SOL
(On/Off)
  x Operation status of rear RH wheel ABS OUT valve is displayed.
RR LH IN SOL
(On/Off)
  x Operation status of rear LH wheel ABS IN valve is displayed.
RR LH OUT SOL
(On/Off)
  x Operation status of rear LH wheel ABS OUT valve is displayed.
EBD WARN LAMP
(On/Off)
    Brake warning lamp ON/OFF status is displayed. ((1))
STOP LAMP SW
(On/Off)
x x Stop lamp switch signal input status is displayed.
MOTOR RELAY
(On/Off)
  x ABS motor and motor relay status is displayed.
ACTUATOR RLY
(On/Off)
  x ABS actuator relay status is displayed.
ABS WARN LAMP
(On/Off)
  x ABS warning lamp ON/OFF status is displayed. ((1))
OFF LAMP
(On/Off)
  x VDC OFF indicator lamp ON/OFF status is displayed. ((1))
OFF SW
(On/Off)
x x VDC OFF switch signal input status is displayed.
SLIP/VDC LAMP
(On/Off)
  x VDC warning lamp ON/OFF status is displayed. ((1))
BATTERY VOLT
(V)
x x Voltage supplied to ABS actuator and electric unit (control unit) is displayed.
GEAR x x Current gear position judged from current gear position signal is displayed.
ENGINE SPEED
(tr/min)
x x Engine speed status is displayed.
YAW RATE SEN
(d/s)
x x Yaw rate detected by yaw rate sensor is displayed.
R POSI SIG
(On/Off)
    R range signal input status judged from R range signal is displayed.
4WD MODE MON
(AUTO/LOCK/##)
x x 4WD control status is displayed.
N POSI SIG
(On/Off)
    N range signal input status judged from N range signal is displayed.
CV1
(On/Off)
    Cut valve 1 operation status is displayed.
CV2
(On/Off)
    Cut valve 2 operation status is displayed.
SV1
(On/Off)
    Suction valve 1 operation status is displayed.
SV2
(On/Off)
    Suction valve 2 operation status is displayed.
STOP LAMP SW2
(On/Off)
    Stop lamp switch signal input status is displayed.
ACCEL POS SIG
(%)
x   Displays the Accelerator pedal position
SIDE G-SENSOR
(m/s2 )
x   Side G detected by side G sensor is displayed.
STR ANGLE SIG
(°)
x   Steering angle detected by steering angle sensor is displayed.
PRESS SENSOR
(bar)
x   Detects the brake fluid pressure of master cylinder part is displayed.
ACCUM PRESS SEN
(bar)
    Detects the brake fluid pressure of accumulator is displayed.
CONT PRESS SEN
(bar)
    Detects the brake fluid pressure of control pressure sensor is displayed
EBD SIGNAL
(On/Off)
    EBD operation status is displayed.
ABS SIGNAL
(On/Off)
    ABS operation status is displayed.
TCS SIGNAL
(On/Off)
    TCS operation status is displayed.
VDC SIGNAL
(On/Off)
    VDC operation status is displayed.
EBD FAIL SIG
(On/Off)
    EBD fail-safe signal status is displayed.
ABS FAIL SIG
(On/Off)
    ABS fail-safe signal status is displayed.
TCS FAIL SIG
(On/Off)
    TCS fail-safe signal status is displayed.
VDC FAIL SIG
(On/Off)
    VDC fail-safe signal status is displayed.
CRANKING SIG
(On/Off)
    Cranking status is displayed.
FLUID LEV SW
(On/Off)
x   Brake fluid level signal input status via CAN communication is displayed.
PARK BRAKE SW
(On/Off)
x   Parking brake switch signal input status via CAN communication is displayed.
STP ON RLY
(On/Off)
    Stop lamp switch relay status is displayed.
USS SIG((2))
(On/Off)
    hill start assist operation status is displayed.
(1) Refer to "SYSTEM DESCRIPTION " for ON/OFF conditions of each warning lamp and indicator lamp.
(2) USS means "hill start assist"