DTC Detection Logic

DTC No.	Trouble diagnosis name (Trouble diagnosis content)	DTC detecting condition	Possible cause
P0340	CMP SEN/CIRC-B1 [Camshaft position sensor (bank 1) circuit]	The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking. The cylinder No. signal is not sent to ECM during engine running. The cylinder No. signal is not in the normal pattern during engine running.	Harness or connectors [Camshaft position sensor (bank 1) circuit is open or shorted.] (APP sensor 2 circuit is shorted.) (Battery current sensor circuit is shorted.) [Crankshaft position sensor circuit is shorted.] (Refrigerant pressure sensor circuit is open or shorted.) (EVAP control system pressure sensor circuit is open or shorted.) Camshaft position sensor (bank 1) Accelerator pedal position sensor Battery current sensor Crankshaft position sensor Refrigerant pressure sensor EVAP control system pressure sensor Camshaft (INT) Starter motor Starting system circuit Dead (Weak) battery
P0345	CMP SEN/CIRC-B2 [Camshaft position sensor (bank 2) circuit]		Harness or connectors [Camshaft position sensor (bank 2) circuit is open or shorted.] Camshaft position sensor (bank 2) Camshaft (INT) Starter motor Starting system circuit Dead (Weak) battery