Active Test

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.

Test item	Description
BATTERY SAVER	This test is able to check interior room lamp operation On: Operate Off: Non-operation
OUTSIDE BUZZER	This test is able to check Intelligent Key warning buzzer operation On: Operate Off: Non-operation
INSIDE BUZZER	This test is able to check warning chime in combination meter operation Take Out: Take away warning chime sounds when CONSULT screen is touched Key: Key warning chime sounds when CONSULT screen is touched Knob: OFF position warning chime sounds when CONSULT screen is touched Off: Non-operation
INDICATOR	This test is able to check warning lamp operation KEY ON: "KEY" Warning lamp illuminates when CONSULT screen is touched KEY IND: "KEY" Warning lamp blinks when CONSULT screen is touched Off: Non-operation
INT LAMP	This test is able to check interior room lamp operation On: Operate Off: Non-operation
LCD	This test is able to check meter display information Engine start information displays when "BP N" on CONSULT screen is touched Engine start information displays when "BP I" on CONSULT screen is touched Key ID warning displays when "ID NG" on CONSULT screen is touched Steering lock information displays when "ROTAT" on CONSULT screen is touched NOTE: For models without steering lock unit, "ROTAT" is displayed, but cannot be tested. P position warning displays when "SFT P" on CONSULT screen is touched INSRT: This item is displayed, but cannot be monitored BATT: This item is displayed, but cannot be monitored Take away through window warning displays when "NO KY" on CONSULT screen is touched Take away warning display when "OUTKEY" on CONSULT screen is touched OFF position warning display when "LK WN" on CONSULT screen is touched
FLASHER	This test is able to check hazard warning lamp operation The hazard warning lamps are activated after "LH/RH/Off" on CONSULT screen is touched
P RANGE	This test is able to check AT shift selector power supply On: Operate Off: Non-operation
ENGINE SW ILLUMI	This test is able to check push-ignition switch illumination operation Push-ignition switch illumination illuminates when "ON" on CONSULT screen is touched
LOCK INDICATOR	This test is able to check LOCK indicator (push-button ignition switch) operation On: Operate Off: Non-operation
ACC INDICATOR	This test is able to check ACC indicator (push-button ignition switch) operation On: Operate Off: Non-operation
IGNITION ON IND	This test is able to check ON indicator (push-button ignition switch) operation On: Operate Off: Non-operation
HORN	This test is able to check horn operation On: Operate Off: Non-operation
TRUNK/BACK DOOR	This test is able to check trunk lid open operation Open: Operate
INTELLIGENT KEY LINK	This test is able to check Intelligent Key interlock function ID No1: BCM transmits Intelligent Key ID No1 to each control unit ID No2: BCM transmits Intelligent Key ID No2 to each control unit
INTELLIGENT KEY LINK (CAN)	This test is able to check Intelligent Key interlock function Off: Non-operation ID No1: BCM transmits Intelligent Key ID No1 to each control unit via CAN communication line ID No2: BCM transmits Intelligent Key ID No2 to each control unit via CAN communication line ID No3: BCM transmits Intelligent Key ID No3 to each control unit via CAN communication line ID No4: BCM transmits Intelligent Key ID No4 to each control unit via CAN communication line ID No5: This item is displayed, but cannot be used