Check Anti-Pinch Function

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Fully open door glass.
Place a piece of wood near the fully closed position.
Close door glass completely using AUTO-UP.
- Check that door glass lowers approximately 150 mm (5.9 in) without pinching piece of wood and stops.
- Check that door glass does not rise when operating power window main switch while lowering.
  CAUTION:
  - Perform initialization when AUTO-UP operation or anti-pinch function does not operate normally.
  - Check that AUTO-UP operates before inspection when initialization is performed.
  - Never check with hands or other body parts because they may be pinched. Never get pinched.
  - It may switch to the fail-safe mode if open/close operation is performed continuously without fully closing. Perform initialization in the above situation. Refer to "FAIL SAFE ".
  - Finish initialization. Otherwise, the next operation cannot be done.
  1. AUTO-UP operation
  2. Anti-pinch function
  3. Door key cylinder switch power window function