LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (Brake Control System (Except CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> DTC C1143: Steering Angle Sensor >> DTC Logic >> DTC Confirmation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 
    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ABS" with CONSULT.

      Is DTC "C1143" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals