DTC Confirmation Procedure

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

: GO TO 2.
DTC REPRODUCTION PROCEDURE
1. Turn the ignition switch OFF to ON.
2. Perform self-diagnosis for "ABS" with CONSULT.
  Is DTC "U1002" detected?
  
  YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
  
  NO: INSPECTION END