ECM RECOMMUNICATING FUNCTION: Special Repair Requirement

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Insert the registered Intelligent Key*, and turn ignition switch ON.
  *: To perform this step, use the key that has been used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Turn ignition switch OFF.
5. Check that the engine starts.
  : GO TO 2.
PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM
Perform "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: SPECIAL REPAIR REQUIREMENT ".

: END