LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Security Control System (Except CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Detection Logic
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to "IPDM E/R: DTC LOGIC ".
  • If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name DTC detecting condition Possible cause
B210D STARTER RELAY ON IPDM E/R detects that the relay is stuck at ON position even if the followings condition are met for about 1 second.
  • Starter control relay ON/OFF signal from BCM
  • Transmission range switch input
IPDM E/R