Component Inspection
WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CVT SHIFT SELECTOR (DETENTION SWITCH)
- Turn ignition switch OFF.
- Disconnect CVT shift selector connector.
- Check continuity between CVT shift selector (detention switch) terminals.
CVT shift selector (detention switch) Condition Continuity Terminal 8 9 Selector lever P position Not existed Other than above Existed Is the inspection result normal?
YES: INSPECTION END
NO: Replace CVT shift selector. Refer to "REMOVAL AND INSTALLATION ".