LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Security Control System (Except CROSSCABRIOLET)) >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> INTELLIGENT KEY: CONSULT Function (BCM - INTELLIGENT KEY) >> Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Active Test

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
Test item Description
BATTERY SAVER This test is able to check interior room lamp operation.
The interior room lamp will be activated after "ON" on CONSULT screen is touched.
PW REMOTO DOWN SET This test is able to check power window down operation.
The power window down will be activated after "ON" on CONSULT screen is touched.
INSIDE BUZZER This test is able to check warning chime in combination meter operation.
  • Take away warning chime sounds when "TAKE OUT" on CONSULT screen is touched.
  • Key warning chime sounds when "KEY WARN" on CONSULT screen is touched.
  • P position warning chime sounds when "P RNG WARN" on CONSULT screen is touched.
  • ACC warning chime sounds when "ACC WARN" on CONSULT screen is touched.
OUTSIDE BUZZER This test is able to check Intelligent Key warning buzzer operation.
The Intelligent Key warning buzzer will be activated after "ON" on CONSULT screen is touched.
INDICATOR This test is able to check warning lamp operation.
  • "KEY" Warning lamp illuminates when "KEY ON" on CONSULT screen is touched.
  • "KEY" Warning lamp flashes when "KEY IND" on CONSULT screen is touched.
INT LAMP This test is able to check interior room lamp operation.
The interior room lamp will be activated after "ON" on CONSULT screen is touched.
LCD This test is able to check meter display information
  • Engine start information displays when "BP N" on CONSULT screen is touched.
  • Engine start information displays when "BP I" on CONSULT screen is touched.
  • Key ID warning displays when "ID NG" on CONSULT screen is touched.
  • Steering lock information displays when "ROTAT" on CONSULT screen is touched.
    NOTE: For models without steering lock unit, "ROTAT" is displayed, but cannot be tested.
  • P position warning displays when "SFT P" on CONSULT screen is touched.
  • Intelligent Key insert information displays when "INSRT" on CONSULT screen is touched.
  • Intelligent Key low battery warning displays when "BATT" on CONSULT screen is touched.
  • Take away through window warning displays when "NO KY" on CONSULT screen is touched.
  • Take away warning display when "OUTKEY" on CONSULT screen is touched.
  • OFF position warning display when "LK WN" on CONSULT screen is touched.
TRUNK/GLASS HATCH This test is able to check back door opener actuator open operation.
This actuator opens when "ON" on CONSULT screen is touched.
FLASHER This test is able to check hazard warning lamp operation.
The hazard warning lamps will be activated after "ON" on CONSULT screen is touched.
HORN This test is able to check horn operation.
The horn will be activated after "ON" on CONSULT screen is touched.
IGN CONT2 This test is able to check ignition relay operation.
The ignition relay will be activated after "ON" on CONSULT screen is touched.
P RANGE This test is able to check CVT shift selector power supply
CVT shift selector power is supplied when "ON" on CONSULT screen is touched.
ENGINE SW ILLUMI This test is able to check push-ignition switch illumination operation.
Push-ignition switch illumination illuminates when "ON" on CONSULT screen is touched.
LOCK INDICATOR
NOTE: This item is displayed, but cannot be tested.
ACC INDICATOR This test is able to check indicator in push-ignition switch operation.
Indicator in push-button ignition switch illuminates when "ON" on CONSULT screen is touched.
IGNITION ON IND This test is able to check indicator in push-ignition switch operation.
Indicator in push-button ignition switch illuminates when "ON" on CONSULT screen is touched.
KEY SLOT ILLUMI This test is able to check key slot illumination operation.
Key slot illumination flash when "ON" on CONSULT screen is touched.
AUTOMATIC BACK DOOR
NOTE: This item is displayed, but cannot be tested.
AUTOMATIC SLIDING DOOR
NOTE: This item is displayed, but cannot be tested.