Data Monitor
WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item | Condition | ||
|---|---|---|---|
| REQ SW-DR | Indicates [ON/OFF] condition of door request switch (driver side). | ||
| REQ SW-AS | Indicates [ON/OFF] condition of door request switch (passenger side). | ||
| REQ SW-RR |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| REQ SW-RL |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| REQ SW-BD/TR | Indicates [ON/OFF] condition of back door request switch. | ||
| PUSH SW | Indicates [ON/OFF] condition of push-button ignition switch. | ||
| IGN RLY2-F/B | Indicates [ON/OFF] condition of ignition relay 2. | ||
| ACC RLY-FB |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| CLUCH SW |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| BRAKE SW 1 | Indicates [ON/OFF](1) condition of brake switch power supply. | ||
| BRAKE SW 2 | Indicates [ON/OFF] condition of brake switch. | ||
| DETE/CANCL SW | Indicates [ON/OFF] condition of P position. | ||
| SFT PN/N SW | Indicates [ON/OFF] condition of P or N position. | ||
| S/L-LOCK | Indicates [ON/OFF] condition of steering lock unit (LOCK).
NOTE:
For models without steering lock unit this item is not displayed.
|
||
| S/L-UNLOCK | Indicates [ON/OFF] condition of steering lock unit (UNLOCK).
NOTE:
For models without steering lock unit this item is not displayed.
|
||
| S/L RELAY-F/B | Indicates [ON/OFF] condition of ignition switch.
NOTE:
For models without steering lock unit this item is not displayed.
|
||
| UNLK SEN-DR | Indicates [ON/OFF] condition of driver door UNLOCK status. | ||
| PUSH SW-IPDM | Indicates [ON/OFF] condition of push-button ignition switch. | ||
| IGN RLY1-F/B | Indicates [ON/OFF] condition of ignition relay 1. | ||
| DETE SW-IPDM | Indicates [ON/OFF] condition of P position. | ||
| SFT PN-IPDM | Indicates [ON/OFF] condition of P or N position. | ||
| SFT P-MET | Indicates [ON/OFF] condition of P position. | ||
| SFT N-MET | Indicates [ON/OFF] condition of N position. | ||
| ENGINE STATE | Indicates [STOP/START/CRANK/RUN] condition of engine states. | ||
| S/L LOCK-IPDM | Indicates [ON/OFF] condition of steering lock unit (LOCK).
NOTE:
For models without steering lock unit this item is not displayed.
|
||
| S/L UNLK-IPDM | Indicates [ON/OFF] condition of steering lock unit (UNLOCK).
NOTE:
For models without steering lock unit this item is not displayed.
|
||
| S/L RELAY-REQ | Indicates [ON/OFF] condition of steering lock relay.
NOTE:
For models without steering lock unit this item is not displayed.
|
||
| VEH SPEED 1 | Display the vehicle speed signal received from combination meter by numerical value [Km/h]. | ||
| VEH SPEED 2 | Display the vehicle speed signal received from ABS or VDC or CVT by numerical value [Km/h]. | ||
| DOOR STAT-DR | Indicates [LOCK/READY/UNLOCK] condition of driver side door status. | ||
| DOOR STAT-AS | Indicates [LOCK/READY/UNLOCK] condition of passenger side door status. | ||
| ID OK FLAG | Indicates [SET/RESET] condition of key ID. | ||
| PRMT ENG STRT | Indicates [SET/RESET] condition of engine start possibility. | ||
| PRMT RKE STRT |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| KEY SW-SLOT | Indicates [ON/OFF] condition of key slot. | ||
| TRNK/HAT MNTR |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| RKE-LOCK | Indicates [ON/OFF] condition of LOCK signal from Intelligent Key. | ||
| RKE-UNLOCK | Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key. | ||
| RKE-TR/BD |
NOTE:
This item is displayed, but cannot be monitored.
|
||
| RKE-PANIC | Indicates [ON/OFF] condition of PANIC button of Intelligent Key. | ||
| RKE-P/W OPEN | Indicates [ON/OFF] condition of P/W DOWN signal from Intelligent Key. | ||
| RKE-MODE CHG | Indicates [ON/OFF] condition of MODE CHANGE signal from Intelligent Key. | ||
| RKE OPE COUN1 | When remote keyless entry receiver receives the signal transmitted while operating on Intelligent Key, the numerical value start changing. | ||
| RKE OPE COUN2 |
NOTE:
This item is displayed, but cannot be monitored.
|
||
|
|||