Work Procedure

SAVING TCM DATA
With CONSULT

Save the TCM data according to the CONSULT display.

NOTE: Even when TCM data is not saved in CONSULT, GO TO 2.

: GO TO 2.
REPLACE TRANSMISSION ASSEMBLY
Replace the transmission assembly. Refer to "2WD: REMOVAL AND INSTALLATION " (2WD), "4WD: REMOVAL AND INSTALLATION " (4WD).

: GO TO 3.
PERFORM TCM PROGRAMMING
With CONSULT
1. During programming, maintain the following conditions:
  Ignition switch: ON
  
  Selector lever: P
  
  Engine speed: 0 rpm
2. Perform programming according to the CONSULT display.
  : GO TO 4.
PERFORM CALIBRATION OF DECEL G SENSOR
Refer to "WORK PROCEDURE "

: WORK END