LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2013 >> QX56 RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Testing, Symptom Diagnosis, Maintenance And Removal And Installation >> Fuel Injector >> Component Inspection (Fuel Injector Relay)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection (Fuel Injector Relay)

  1. CHECK FUEL INJECTOR RELAY 
    1. Turn ignition switch OFF.
    2. Remove fuel injector relay.
    3. Check the continuity between fuel injector relay terminals under the following conditions.
      Fuel injector relay Condition Continuity
      Terminal
      3 and 5 12V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace fuel injector relay.

      Fig 1: Identifying Fuel Injector Relay Terminals
      G08855435Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals