Detailed Flow
- COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis work sheet. Refer to DIAGNOSTIC WORK SHEET .
GO TO STEP 2 .
- PERFORM THE SELF-DIAGNOSIS
Perform self-diagnosis with CONSULT.
Is there any DTC displayed?
YES
Record or print self-diagnosis results and freeze frame data (FFD). GO TO STEP 3 .
NO
GO TO STEP 4 .
- PERFORM THE SYSTEM DIAGNOSIS
Perform the diagnosis applicable to the displayed DTC of "ABS" with CONSULT. Refer to DTC INDEX .
GO TO STEP 7 .
- CHECK THE SYMPTOM THAT IS NOT CONSIDERED A SYSTEM MALFUNCTION
Check that the symptom is a normal operation that is not considered a system malfunction. Refer to DESCRIPTION .
Is the symptom a normal operation?
YES
INSPECTION END
NO
GO TO STEP 5 .
- CHECK THE WARNING LAMP AND INDICATOR LAMP FOR ILLUMINATION
Check that the warning lamp and indicator lamp illuminate.
- ABS warning lamp: Refer to DESCRIPTION .
- Brake warning lamp: Refer to DESCRIPTION .
- VDC warning lamp: Refer to DESCRIPTION .
- VDC OFF indicator lamp: Refer to DESCRIPTION .
Is ON/OFF timing normal?
YES
GO TO STEP 6 .
NO
GO TO STEP 2 .
- PERFORM THE DIAGNOSIS BY SYMPTOM
Perform self-diagnosis for "ABS" with CONSULT.
GO TO STEP 7 .
- REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
GO TO STEP 8 .
- MEMORY CLEAR
Perform self-diagnosis memory clear for "ABS" with CONSULT.
GO TO STEP 9 .
- FINAL CHECK
Perform the self-diagnosis again, and check that the malfunction is repaired completely.
Is no other DTC present and the repair completed?
YES
INSPECTION END
NO
GO TO STEP 3 .