Physical Values

Terminal No. (Wire color)		Description		Condition	Value (Approx.)
+	-	Signal name	Input/Output	Condition	Value (Approx.)
1 ()	Ground	solenoid power supply	Output	Engine speed: At idle	0 V
1 ()	Ground	solenoid power supply	Output	Engine speed: 3, 000 rpm or more constant	2.5 V^*
2 ()	Ground	solenoid ground	-	Engine speed: At idle	0 V
2 ()	Ground	solenoid ground	-	Engine speed: 3, 000 rpm or more constant	0 V
3 ()	Ground	Transfer fluid temperature sensor ground	-	Always	0 V
7 ()	Ground	Ignition switch	Input	Ignition switch: ON	Battery voltage
7 ()	Ground	Ignition switch	Input	Ignition switch: OFF	0 V
8 ()	-	CAN-H	Input/Output	-	-
9 ()	Ground	Power supply (solenoid)	Input	Always	Battery voltage
10 ()	Ground	Ground	-	Always	0 V
11 ()	Ground	Ground	-	Always	0 V
13 ()	Ground	Transfer fluid temperature sensor power supply	Output	Transfer temperature: 20°C (68°F)	1.56 V
13 ()	Ground	Transfer fluid temperature sensor power supply	Output	Transfer temperature: 80°C (176°F)	0.44 V
15 ()	Ground	Power supply (control unit)	Input	Always	Battery voltage
16 ()	-	CAN-L	Input/Output	-	-

* : The values are changed by throttle opening and engine speed.

CAUTION:

When using circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.