Diagnostic Test
- CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES
GO TO STEP 3 .
NO
GO TO STEP 2 .
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
Check BCM for DTC. Refer to DTC INDEX .
NO
Repair or replace the malfunctioning parts.
- CHECK DOOR SWITCH
Check door switch.
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
GO TO STEP 4 .
NO
Repair or replace the malfunctioning parts.
- CHECK KEY SLOT
Check key slot.
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
GO TO STEP 5 .
NO
Repair or replace the malfunctioning parts.
- CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
GO TO STEP 6 .
NO
Repair or replace the malfunctioning parts.
- CHECK KEY SLOT INDICATOR
Check key slot indicator.
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
GO TO STEP 7 .
NO
Repair or replace the malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
NO
GO TO STEP 1 .