Component Function Check

1. Turn ignition switch ON.
2. Select "LIFT RR PULSE" in the "Data monitor" mode using CONSULT.
3. Check lifting sensor (rear) signal under the following conditions.

   Monitor item	Condition		Value
   LIFT RR PULSE	Seat lifting (rear)	Operate (Up)	Change (increase)*1
   		Operate (Down)	Change (decrease)*1
   		Release	No change*1

   ^*1 : The value at the seat position attained when the battery is connected is considered to be 32768.

Is the indication normal?

YES 

INSPECTION END

NO 

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .