LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> Q60 Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner (Convertible) >> DTC/Circuit Diagnosis >> Mirror Sensor >> Driver Side >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION

    1. Turn ignition switch ON.
    2. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in the "Data monitor" using CONSULT.
    3. Check mirror sensor (driver side) signal under the following condition.
      Monitor item Condition Value
      MIR/SEN LH U-D Door mirror (driver side) Change between
      3.4 [V] (close to peak)
      0.6 [V] (close to valley)
      MIR/SEN LH R-L Change between
      0.6 [V] (close to left edge)
      3.4 [V] (close to right edge)

    Is the indication normal?

    YES 

    INSPECTION END

    NO 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals