Diagnostic Test
- BRAKE WARNING LAMP OPERATION CHECK 1
Check that the lamp illuminates for approximately 1 second after the ignition switch is turned ON.
Is the inspection result normal?
YES
GO TO STEP 2.
NO
Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .
- BRAKE WARNING LAMP OPERATION CHECK 2
Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the parking brake lever (M/T) or the parking brake pedal (A/T).
Is the inspection result normal?
YES
INSPECTION END
NO
Check the parking brake switch. Refer to COMPONENT INSPECTION .