Diagnostic Test

1. Turn ignition switch OFF.
2. Remove VVEL actuator motor relay.
3. Check the continuity between VVEL actuator motor relay terminals under the following conditions.
   Fig 1: Checking Continuity Between VVEL Actuator Motor Relay Terminals

   Courtesy of NISSAN NORTH AMERICA, INC.

   Terminal	Condition	Continuity
   3 and 5	12 V direct current supply between terminals 1 and 2	Existed
   	No current supply	Not existed

Is the inspection result normal?

YES 

INSPECTION END

NO 

Replace VVEL actuator motor relay.