Diagnostic Test
- CHECK ASCD CLUTCH SWITCH-I
- Turn ignition switch OFF.
- Disconnect ASCD clutch switch harness connector.
- Check the continuity between ASCD clutch switch terminals under the following conditions.
Terminals Condition Continuity 1 and 2 Clutch pedal Fully released Existed Slightly depressed Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO STEP 2 .
- CHECK ASCD CLUTCH SWITCH-II
- Adjust ASCD clutch switch installation. Refer to INSPECTION AND ADJUSTMENT .
- Check the continuity between ASCD clutch switch terminals under the following conditions.
Terminals Condition Continuity 1 and 2 Clutch pedal Fully released Existed Slightly depressed Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace ASCD clutch switch. Refer to EXPLODED VIEW .