LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> Q60 Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security Control System (Convertible) >> DTC/Circuit Diagnosis >> DTC B2110: Shift Position/Clutch Interlock Switch >> Diagnosis Procedure >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK DTC WITH BCM

    Check "Self-diagnosis result" using CONSULT. Refer to DTC INDEX .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Repair or replace the malfunctioning parts.

  2. CHECK TRANSMISSION RANGE SWITCH SIGNAL

    1. Turn ignition switch OFF.
    2. Disconnect IPDM E/R connector.
    3. Turn ignition switch ON.
    4. Check voltage between IPDM E/R harness connector and ground.
      (+) (-) Condition Voltage (V)
      (Approx.)
      IPDM E/R
      Connector Terminal
      E5 30 Ground Selector lever
      (A/T models)      		 N or P position Battery voltage
      Other than above 0
      Clutch pedal
      (M/T models)      		 Depressed Battery voltage
      Not depressed 0

    Is the inspection result normal?

    YES 

    Replace IPDM E/R. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 3  .

  3. CHECK TRANSMISSION RANGE SWITCH Signal CIRCUIT

    1. Disconnect BCM connector.
    2. Check continuity between IPDM E/R harness connector and BCM harness connector.
      IPDM E/R BCM Continuity
      Connector Terminal Connector Terminal
      E5 30 M123 140 (A/T models) Existed
      114 (M/T models)
    3. Check continuity between IPDM E/R harness connector and ground.
      IPDM E/R Ground Continuity
      Connector Terminal
      E5 30 Not existed

    Is the inspection result normal?

    YES 

    Replace BCM. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

scientia non olet · About LEMON Manuals