Diagnostic Test
- CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)
Lock/unlock door with door request switch.
Refer to SYSTEM DESCRIPTION .
Is the operation normal?
YES
GO TO STEP 2 .
NO
Check Intelligent Key system (door lock function). Refer to DIAGNOSIS PROCEDURE .
- PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" on Work Support in "INTELLIGENT KEY".
Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .
GO TO STEP 3 .
- PERFORM SELF DIAGNOSTIC RESULT
Perform Self Diagnostic Result in "BCM", and check whether or not DTC of inside key antenna is detected.
Is DTC detected?
YES
Refer to DTC LOGIC (instrument center), DTC LOGIC (console) or DTC LOGIC (trunk room).
NO
GO TO STEP 4 .
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to COMPONENT FUNCTION CHECK .
Is the operation normal?
YES
GO TO STEP 5 .
NO
Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
NO
GO TO STEP 1 .