ID Registration Without Transmitter Activation Tool
- Turn the ignition switch ON.
- Select the start button on the Consult "ID REGIST" screen.
- Hold the sensor activation tool (J-45295) at the side of the tire at the location to the tire pressure sensor.
- Starting with the left front tire, press and hold the sensor activation tool button while pushing the tool to the tire surface (approximately 5 seconds).
- Repeat the procedure in the order of: front right, rear right, rear left.
- After the ID registration procedure for all wheels is completed, press "END" to end ID registration, and check that ID registration for all wheels is completed.