Camera Cont.
The four functions of "Correct Draw Line of Rear view Camera", "Alter/Confirm Configuration", "Reset Configuration" and "Camera Syst Type" are available.
Correct Draw Line of Rear view Camera
- Use this mode to adjust the guide line display position of the rear view monitor if necessary after removing the rear view monitor camera.
Alter/Confirm Configuration
- Configuration stored in the AV control unit can be checked and modified.CONFIGURATION LIST
Setting item Setting Setting item Setting Predi. Course Lines With Wheelbase 2.8499999 Rear Coeff. K - 133446.7 Total Length 0.0000000 Rear Coeff. F 0.0016960 Steering Gear Ratio 14.939999* 1 Rear Coeff. P1 0.0000046 16.884000* 2 Rear Coeff. P2 0.0000056 Side Coeff. K 0.0000000 Rear Coeff. C1 823.00000 Side Coeff. F 0.0000000 Rear Coeff. C2 480.00000 Side Coeff. P1 0.0000000 Rear Coeff. D1 800.00000 Side Coeff. P2 0.0000000 Rear Coeff. D2 494.00000 Side Coeff. C1 0.0000000 Car Width 1.8500000 Side Coeff. C2 0.0000000 Rear Offset 0.0000000 Side Coeff. D1 0.0000000 Rear Height 0.9852600 Side Coeff. D2 0.0000000 Rear L/R Angle 0.0000000 Side Offset 0.0000000 Rear Up/Dn Angle 47.869998 Overall Height 0.0000000 Rear Roll Angle 0.0000000 Side L/R Angle 0.0000000 Bumper Rear Dist. 0.1637200 Side Up/Dn Angle 0.0000000 Bumper Rear Ax Dist 0.9650000 Side Roll Angle 0.0000000 Steer. Max Angle 498.69720* 1 Side Front End Dist 0.0000000 563.58789* 2 Total Width 0.0000000 Min. Turning Red. 5.5000000 - - - * 1: Sport grade or sports premium grade
- * 2: Except for above.
Reset Configuration
- Configuration stored in the AV control unit can be initialized.
Camera Syst Type
- Type of camera system is selectable.