LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> Q60 IPL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner (Convertible) >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION

    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT.
    3. Check the power walk-in switch signal under the following condition.
    Test item Condition Status
    WALK-IN SW Power walk-in switch Pressed ON
    Released OFF

    Is the indication normal?

    YES 

    INSPECTION END

    NO 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals