LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2015 >> Q60 S Limited >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System (Coupe) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> Special Repair Requirement >> Initialization Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Initialization Procedure

  1. Disconnect battery negative terminal or power window switch connector. Reconnect it after a minute or more.
  2. Door switch is OFF (close).
  3. Turn ignition switch ON.
  4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open.)
  5. Continue pulling the power window switch AUTO-UP. Even after glass stops at the fully closed position, keep pulling the switch for 3 seconds or more.
  6. Initializing procedure is completed.
  7. Inspect anti-pinch function.
CAUTION:

When initialization is not complete, power window UP does not operate while door is open.

scientia non olet · About LEMON Manuals