Zoom Function

The ZOOM ratio of camera can be changed when calibrating the camera.

Fig 1: Fine Tuning Of Birds-Eye View (ZOOM Ratio) Screen Display
Courtesy of NISSAN NORTH AMERICA, INC.
It shifts to ZOOM function mode by shifting the selector lever to a position other than the "R" position →"R" position → other than "R" position in the "Fine Tuning of Birds-Eye View" mode.
The changing of ZOOM ratio can be performed for each camera. Move the "+"-mark to select the camera by pressing "CAMERA" switch and press the left/right switch to change the ZOOM ratio.

NOTE:

When the position is not correct in "Fine Tuning of Birds-Eye View" mode, use this "ZOOM" function to adjust it.
If this function is used, always adjust the upper/lower/left/right position again on the "Fine Tuning of Birds-Eye View" screen.